What A Technician Does During A Brake Inspection

A brake inspection is one of the most important things you'll do with your vehicle. If you do not inspect your brakes and they fail, you might not be able to stop your car and you might end up in an accident. A brake inspection service will make sure that your car is safe to drive and will perform the necessary repairs if they discover any defects with your brakes.

The Test Drive

One of the first things that an automotive technician will do is to test drive your car. In some cases, they might be able to immediately spot that there is something wrong with your car and will make the necessary repairs. The mechanic will also check your engine lights as they can indicate whether the brakes are defective or not.

The Visual Inspection

Even if the technician is not able to identify defective brakes, this doesn't mean that the is nothing wrong with the brakes in your car. The technician will also need to open the hood of the car to visually inspect the engine and the brakes.

Shortly after operating the vehicle, there might be visual evidence that the brakes are not functioning properly. They will measure the height of the brakes when they are at rest to make sure that they are normal. It's possible for the brakes to be so damaged that the pedal is all the way down to the floor.

Inspectors will need to look for parts that have worn out or are missing. For example, there might be a part that fell off and the brakes might now be defective as a result. They will make sure that the brake lines and drums are not worn out and that they are not contaminated. Whether the fluid is contaminated is determined by a brake fluid analysis.

Topping Off the Brake Fluid

The technician will also make sure that the lines are not leaking fluid and will replace the fluid if there isn't enough. The fluid serves an essential role in transferring pressure through your brake system so you can stop your car.

Replacing the Brake Pads

Worn brake pads are a common cause of defective brakes since brake pads wear out and eventually need to be replaced. A technician will replace the brake pads and will also make surer that the rotors are not defective. Afterward, they will test your car to make sure that it can brake correctly.

For more information on brake inspection, contact a professional near you.

Share